Data Sheet

ManualsBrandsComnet ManualsFiber Optic Transmission100 Mbps Media Converter

FEATURES

› 10/100 Mbps Ethernet

• 10/100 BASE-T/TX electrical port

• 100 BASE-FX optical port

› Electrical port supports Auto-Negotiation for 10 Mbps or

100 Mbps, full duplex or half duplex data.

› Optical port supports 100 Mbps full duplex data

› Automatic MDI/MDI-X crossover

› Distances up to: 3 km (2 mi) Multimode

20 km (12 mi) Single Mode

› Transparent to data encoding/compatible with major data

protocols

› Tested and certified by an independent laboratory for full

compliance with the environmental requirements (ambient

operating temperature, mechanical shock, vibration, humidity

with condensation, high-line/low-line voltage conditions

and transient voltage protection) of NEMA TS-1/TS-2 and

CALTRANS Traffic Signal Control Equipment Specifications

› ST or SC optical connectors

› 1 or 2 fiber design

› AC/DC powered

› Voltage transient protection on all power and signal input/

output lines provides protection from power surges and

other voltage transient events.

› No in-field optical adjustments required

› LED Indicators

› Standard size is hot-swappable rack module

› Standard size is interchangeable between stand-alone or

rack mount use – ComFit

› IEEE 802.3 compliant

› Lifetime Warranty

APPLICATIONS

› 10/100 Mbps Ethernet Media Converter

› High Speed Computer Links

The ComNet

™

Ethernet CNFE100X media converter series are one-channel

Ethernet electrical to optical media converters. These auto-negotiating devices

accept a 10/100 Mbps electrical input and convert this to a 100 Mbps optical

output. This series of media converters use multimode and single-mode optical

fiber and one and two fiber SC and ST optical connectors. LED indicators confirm

operational status. All models are environmentally hardened with no electrical or

optical adjustments (Plug and Play). Packaged in the exclusive ComNet ComFit

housing, the standard size units may be either wall or rack mounted. Models within

the series are also available in a small size. The units are powered by an included

DC power supply.

CNFE100(X) Series

10/100 Mbps Ethernet Electrical To Optical Media Converter

INCLUDED CONVERTERHARDENED POWERED

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

Summary of content (3 pages)

PAGE 1
0/100 Mbps Ethernet Electrical To Optical Media Converter CNFE100(X) Series INCLUDED HARDENED POWERED CONVERTER The ComNet™ Ethernet CNFE100X media converter series are one-channel Ethernet electrical to optical media converters. These auto-negotiating devices accept a 10/100 Mbps electrical input and convert this to a 100 Mbps optical output. This series of media converters use multimode and single-mode optical fiber and one and two fiber SC and ST optical connectors.
PAGE 2
10/100 Mbps Ethernet Electrical To Optical Media Converter CNFE100(X) Series SPECIFICATIONS Ethernet Electrical & Mechanical Data Rate 10/100 Mbps IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Port/Full Duplex Optical Port Connectors Optical ST or SC, 1 or 2 Fibers Power Terminal Block Electrical RJ45 Current Protection Automatic Resettable Solid-State Current Limiters Circuit Board Meets IPC Standard Size (L×W×H) Standard: 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm) Mini: 3.
PAGE 3
CNFE100(X) Series 10/100 Mbps Ethernet Electrical To Optical Media Converter ORDERING INFORMATION – Standard Mount DC-Only Media Converter Part Number Description Connector Fibers Req’d Fiber Optical Pwr Budget CNFE1002M1A 10/100 Mbps Ethernet 1310/1550nm ST 1 Multimode 10 dB 3 km (2 miles) 1 CNFE1002M1B 10/100 Mbps Ethernet 1550/1310nm ST 1 Multimode 10 dB 3 km (2 miles) 1 CNFE1002S1A 10/100 Mbps Ethernet 1310/1550nm ST 1 Singlemode 15 dB 20 km (12 miles) 1 CNFE1002S1B 10/1