Data Sheet

09 Apr 2015
© 2015 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
CLFE4+1SMS(POE)(C,U)
10/100 4TX+1EX Ethernet Self-managed Switch
with Power over Ethernet (PoE+)
SPECIFICATIONS
TYPICAL APPLICATION
ORDERING INFORMATION
Part Number Description
CLFE4+1SMSC 4 Port 10/100 Mbps Ethernet Self-managed Switch, with Coaxial CopperLine uplink port
CLFE4+1SMSU 4 Port 10/100 Mbps Ethernet Self-managed Switch, with UTP CopperLine uplink port
CLFE4+1SMSPOEC 4 Port 10/100 Mbps Ethernet Self-managed Switch with PoE+, with Coaxial CopperLine uplink port
CLFE4+1SMSPOEU 4 Port 10/100 Mbps Ethernet Self-managed Switch with PoE+, with UTP CopperLine uplink port
Included Accessories
Options
Unit-appropriate power supply (one each provided with each non-PoE unit).
For PoE units order suitable PoE power supply (sold separately)
[2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit - With Mounting Hardware ( sold separately, order model DINBKT1 or DINBKT4)
Ethernet
Data Interface Ethernet
Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Ports
Standards IEEE 802.3at PoE+,
RFC: 768 UDP, 2068 HTTP, 793 TCP
791 IP, 1783 TFTP, 894 IP over Ethernet.
Connectors
Operating Power Terminal Block
Ethernet RJ-45
Extended Distance Coaxial (C): female BNC
Ethernet (U): RJ-45
LED Indicators - Electrical Link/Data Activity
- Power
- Power over Ethernet (PoE+)
- Extension Link/Activity
Power
Operating Voltage 9 to 12 VDC (non-PoE), 48 to 56VDC (PoE)
Power Consumption 10W (non-PoE), 130W (PoE)
Electrical & Mechanical
Surface Mount Wall or Flat Surface Screw Attachment
Number of Rack Slots 1 (Although the units may be mounted inside a
ComNet rack the PoE models cannot be powered
from the built-in rack PSU; they must be powered
by an external 48-56VDC PSU.)
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (L×W×H) 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight <2 lbs./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
UL Safety certifications conducted at
maximum ambient temperatures (T
ma
) of
65ºC
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)²
NOTE: In a continuing effort to improve and advance technology,
product specifications are subject to change without notice.
MAXIMUM TRANSMISSION DISTANCES³
12 VDC
48 to 56VDC
4
See Chart Above
PoE Cameras
CLFE(X)EO(C,U)
CLFE4+1SMSPOE(C,U)
10 or 100 Mbps Switch
CAT-5 CABLE
PoE POWER
CAT5 or COAX
[4] For non-PoE applications, use the
CLFE4+1SMS(C,U) with a 12 VDC Power Supply
Media COAX - RG59/U UTP - 4 pair UTP - 1 pair
Data Rate
10M 100M 10M 100M 10M 100M
Extended Distance³
5,000 ft
1,524 m
2,000 ft
610 m
3,000 ft
914 m
2,000 ft
610 m
3,000 ft
914 m
1,000 ft
305 m
[3] Distance figures are obtained using in-house testing mirroring installations. Factors such as coaxial/copper cable quality, the number of
connectors/splices in the cable run, and environmental conditions encountered within the installation may affect the actual transmission
distance, and should be taken into consideration.