Data Sheet

ManualsBrandsComnet ManualsNetwork4 Port 10/100 Mbps Ethernet Self-Managed Switch

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› No Programming Required

› 10/100 Mbps Ethernet

• 4 × 10/100 BASE-T/TX electrical ports with optional PoE+

• 1 × 10/1000Mbps CopperLine electrical uplink

› Electrical ports support Auto-Negotiation for 10 Mbps

or 100 Mbps, full duplex or half duplex data.

› Pre-programmed Port for uplink

› Full 10/100 Mbps Bandwidth

› Supports Multicast, Unicast and Jumbo Frame

› Automatic MDI/MDI-X crossover

› Designed to meet full compliance with the environmental

requirements (ambient operating temperature, mechanical

shock, vibration, humidity with condensation, high-line/low-

line voltage conditions and transient voltage protection) of

NEMA TS-1/TS-2 and the Caltrans Specification for Traffic

Signal Control Equipment.

› Voltage transient protection on all power and signal input/

output lines provides protection from power surges and other

voltage transient events.

› Power and Activity status LED indicators

› Hot-swappable rack modules

› Interchangeable between stand-alone or rack mount use –

ComFit, or can be DIN-Rail mounted with optional kit

› IEEE 802.3 compliant

› Lifetime Warranty

APPLICATIONS

› IP Video Applications

› CCTV systems for casinos, airports, school campuses

› Retrofit of existing analog CCTV installations to Ethernet

based systems

The ComNet

™

CLFE4+1SMS[POE](C,U) is a five-port Ethernet switch with uplink

management functionality and provides 4 copper ports operating at 10/100Mbps

and is designed to combine four electrical ports into a single electrical Cat5, UTP

or Coax CopperLine

port that forwards this data to the next network device. There

is no programming required to use this product. The ComNet CLFE4+1SMS comes

pre-programmed, preventing network video flooding with DIP switch selection

of the fifth electrical port as uplink or as an unmanaged switch. Ports 1–4 of the

CLFE4+1SMSPOE can supply up to thirty (30) watts of Power over Ethernet (PoE)* and

incorporate PoE+ features based on the IEEE 802.3at standard. It is “Plug-and-Play”.

CLFE4+1SMS[POE](C,U)

10/100 4TX+1EX Ethernet Self-managed Switch

with Power over Ethernet (PoE+)

30W

4+1

EXTENDERHARDENED

* Power Supply for PoE applications is sold separately.

Summary of content (2 pages)

PAGE 1
0/100 4TX+1EX Ethernet Self-managed Switch with Power over Ethernet (PoE+) CLFE4+1SMS[POE](C,U) HARDENED EXTENDER 4+1 30W The ComNet™ CLFE4+1SMS[POE](C,U) is a five-port Ethernet switch with uplink management functionality and provides 4 copper ports operating at 10/100Mbps and is designed to combine four electrical ports into a single electrical Cat5, UTP or Coax CopperLine® port that forwards this data to the next network device. There is no programming required to use this product.
PAGE 2
10/100 4TX+1EX Ethernet Self-managed Switch with Power over Ethernet (PoE+) CLFE4+1SMS(POE)(C,U) SPECIFICATIONS Ethernet Electrical & Mechanical Data Interface Ethernet Data Rate 10/100 Mbps IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Ports Standards IEEE 802.3at PoE+, RFC: 768 UDP, 2068 HTTP, 793 TCP 791 IP, 1783 TFTP, 894 IP over Ethernet.