Data Sheet

16 Sep 2015
© 2015 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
CLFE(X)EO(C,U)
Ethernet-over-Copper Extender With Pass-Through PoE
TYPICAL APPLICATIONS
PoE Pass-Through Mode
CLFE1EO(C,U)
CLFE1EO(C,U)
10 or 100 Mbps
PoE Switch
Extended Distance
PoE Camera
Cat-5 Cable
PoE Power
UTP or Coax
Non-PoE Mode
CLFE1EO(C,U)
CLFE1EO(C,U)
12 VDC
12 VDC /
24 VAC
12 VDC /
24 VAC
10 or 100 Mbps
Switch
Extended Distance
IP Camera
PoE Pass-Through Mode with Multiple Remote Units
Extended Distance
PoE Camera
CLFE1EO(C,U)
PoE Camera
CLFE1EO(C,U)
PoE Camera
CLFE1EO(C,U)
PoE Camera
CLFE1EO(C,U)
CLFE4EO(C,U)
10 or 100 Mbps
PoE Switch
MAXIMUM TRANSMISSION DISTANCES
1
Media COAX - RG59/U UTP - 4 pair UTP - 1 pair
Data Rate
10M 100M 10M 100M 10M 100M
Source Power
15W 30W 15W 30W 15W 30W 15W 30W N/A
Non-PoE Max.Distance
1
5,000 ft
1,524 m
2,000 ft
610 m
3,000 ft
914 m
2,000 ft
610 m
3,000 ft
914 m
1,000 ft
305 m
PoE CLASS2 (6.5W)
1
3,000 ft
914 m
3,000 ft
914 m
2,000 ft
610 m
2,000 ft
610 m
3,000 ft
914 m
3,000 ft
914 m
2,000 ft
610 m
2,000 ft
610 m
N/A
PoE CLASS3 (13W)
1
750 ft
228 m
850 ft
259 m
750 ft
228 m
850 ft
259 m
750 ft
228 m
850 ft
259 m
750 ft
228 m
850 ft
259 m
N/A
[1] Distance figures are based on a 50 V PSE PoE power source, and external power supplies for the extenders. Distance figures are obtained
using in-house testing mirroring installations. Factors such as coaxial and copper cable quality, the number of connectors and splices in the
cable run, the use of PoE, and environmental conditions encountered within the installation might affect the actual transmission distance and
should be taken into consideration. Due to advanced negotiation signaling required in IEEE802.3at applications, pass-through applications are
limited to IEEE802.3af PD devices only. When using UTP models Pass-Through PoE is only possible in 4-pair mode.