Data Sheet

ManualsBrandsComnet Manualstransmission1 Ch Ethernet Over Coax Extender w/Pass-Through PoE

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› Transmits individual Ethernet data channels with Pass-

through PoE over standard UTP or Coaxial cable

› Extends Ethernet up to 3,000 feet (914 m) at 10 Mbps or

2,000 feet (610 m) at 100 Mbps over UTP cable

› Extends Ethernet up to 5,000 feet (1,524 m) at 10 Mbps or

2,000 feet (610m) at 100 Mbps over Coaxial cable

› Extended temperature operation from -40°C to +75°C

› Extended Pass-through PoE meets the IEEE 802.3af standard

for Power over Ethernet

› Full 10/100 Mbps Bandwidth

› Supports Multicast, Unicast and Jumbo Frame

› Symmetric Bandwidth provides consistent upload and

download with virtually zero packet loss over the total usable

distance

› Type tested to RFC-2544 TCP/IP network bandwidth packet

transmission standards

› User-selectable data rate for maximum bandwidth and

transmission distance utilization

› Complies with all major IEEE standards and RFC network

protocols for UDP, TCP/IP, HTTP/HTTPs

› Designed to meet full compliance with the environmental

requirements (ambient operating temperature, mechanical

shock, vibration, humidity with condensation, high-line/low-

line voltage conditions and transient voltage protection) of

NEMA TS-1/TS-2 and the Caltrans Specification for Traffic

Signal Control Equipment.

› Designed and manufactured in the USA

› LED status indicators confirm operating status

› Available in small-size, ComFit interchangeable stand

alone or 1RU high rack mounted models

› Lifetime warranty

APPLICATIONS

› Retrofit existing analog CCTV installations to Ethernet-

based systems

› CCTV systems for casinos, airports, school campuses

The ComNet CopperLine® Ethernet over copper line supports up to sixteen

channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair

cable (CAT-5, UTP), or over coaxial cable. The single channel units may be

sixteen channel units operate from local power. These units provide the

ultimate flexibility for extending a powered device (PD) over long distance

copper. DIP switches are provided for user-selection of local or remote, 10 or

100Mbps, and 1 pair or 4 pair (UTP) settings.

CLFE(X)EO(C,U)

Ethernet-over-Copper Extender With Pass-Through PoE

EXTENDER PASS-THRU-40º TO

75º

Summary of content (3 pages)

PAGE 1
Ethernet-over-Copper Extender With Pass-Through PoE CLFE(X)EO(C,U) -40º TO +75º EXTENDER PASS-THRU The ComNet CopperLine® Ethernet over copper line supports up to sixteen channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply. Four, eight, and sixteen channel units operate from local power.
PAGE 2
Ethernet-over-Copper Extender With Pass-Through PoE CLFE(X)EO(C,U) SPECIFICATIONS Ethernet Mechanical Data Interface 10/100BaseT(X) Ethernet Data Rate DIP-switch selectable 10/100Mbps Full data rate / full duplex up to the maximum rated distance RFC 2544 TCP/IP Packet Transmission Standards IEEE 802.3af PoE, RFC: 768 UDP, 2068 HTTP, 793 TCP 791 IP, 1783 TFTP, 894 IP over Ethernet.
PAGE 3
Ethernet-over-Copper Extender With Pass-Through PoE CLFE(X)EO(C,U) MAXIMUM TRANSMISSION DISTANCES1 Media COAX - RG59/U Data Rate UTP - 4 pair 10M Source Power 100M 15W 30W 10M 15W 5,000 ft 1,524 m Non-PoE Max.Distance1 UTP - 1 pair 30W 100M 15W 2,000 ft 610 m 30W 10M 15W 3,000 ft 914 m 30W 2,000 ft 610 m 100M N/A 3,000 ft 914 m 1,000 ft 305 m PoE CLASS2 (6.