Operating Instructions and Installation Instructions

ComNav Vector G2 & G2B Installation & Operation Installation

Document PN 29010078 V2.0 - 19 -

DRAFT #3 – 29 May 2009

Location & Orientation

There are two primary mounting orientations for the Vector G2:

• Normally, the G2 will be mounted so that the longitudinal axis is aligned with the

vessel’s fore-aft centreline, or is parallel to that centreline. In this orientation, the G2

can output both the Heading and the Pitch of the vessel.

BOW

STERN

Vessel’s

Heading

Alignment

Sight

Short-sight

(side) Post

Long-sight

(front) Post

Arrow on

case bottom

Secondary

Antenna

Primary

Antenna

Figure 2 – Heading & Pitch Installation (viewed from above)