Operating Instructions and Installation Instructions

ComNav Navigator G2 Installation & Operation Introduction
Document PN 29010081 V1.1 - 10 -
Vector Series GPS Compass
A Vector Series GPS Compass uses multiple GPS antennas and sensors to accurately
sense vessel position, heading, pitch, and roll. A Vector Series compass communicates
NMEA 0183 information out two data ports. Both RS232 and RS422 signal level outputs
are supported.
Figure 2 – Vector G2 GPS Compass
Display Head
The Navigator G2 Display Head provides graphical and text information about the vessel
position and attitude (speed, heading, turn rate). Two (2) G2 Display Heads can be
driven from a single Distribution Unit.
Figure 3 - Navigator G2 Display Head
www.busse-yachtshop.de | [e-mail]