User's Guide

SinoGNSS
○
R
T300 PLUS User Guide
35
⚫ Rover station
○
1
A T300 PLUS receiver
○
2
A Whip antenna
○
3
A controller with software installed
○
4
A range pole with bracket
⚫ Click Device-> Base ->Add, select External radio.
• When start succeed, set up the
frequency channel, and Rover
frequency should be same.
• Be sure to set the same baud
rate as your CDL7(default value
is 38400, you also can change in
Param tab based on your CDL7).
5.7 PDA CORS Mode
Without setting up your own base stations, the T300 PLUS GNSS receiver can
receive correction data transmitted from continuously operating reference
station via PDA’s GPRS or WIFI. To do RTK survey in PDA CORS mode, it requires: