User's Guide

SinoGNSS
○
R
T300 PLUS User Guide
31
②
5.5 Internal Radio Mode
T300 PLUS GNSS receiver supports transmit & receive the correction data in internal
radio mode. To conduct the RTK survey in internal radio mode, it requires:
○
1
A controller with software
installed
○
2
An extension bar
○
3
Two units of T300
PLUS GNSS receiver
○
4
Two whip antennas
○
5
A range pole with bracket
○
6
Tripod and tribrach
Tip: The external power supply is recommended when T300 PLUS set as a base station.
More: Aim to improve the radius of work field, we can change the base receiver’s Whip
Antenna to External Antenna. And others no need change.
① T300 PLUS GNSS Receiver
② External Antenna
5.5.1 Base Station by Survey Master
Firstly, build Bluetooth connection between the T300 PLUS receiver and your
controller as shown in Chapter 5.4.
Secondly, modify parameters including correction format, antenna type and
communication protocols:
⚫ Click Device-> Base ->Add, select Internal radio.
①
○
6