User's Guide

SinoGNSS
○
R
T300 PLUS User Guide
17
After setup, you can go to Device Info->Status to check device status.
Base settings include Ntrip Server (Same with internal GSM in Survey Master) and
Radio (Same with internal radio in Survey Master).
(1) Ntrip Server:
a) Start the base: if you have started the base setup in Base Station Configuration, then
no need to setup again, just click Next; If you have not started base setup, you can go
to Base Station Configuration to set the base, or you can set the station ID, and set the
base coordinate here, then go to Antenna Setup to set the base antenna, then start
the base, click Next to the Ntrip settings.