User's Guide

SinoGNSS
○
R
T300 PLUS User Guide
12
3.3.1 Checking the receiver status
In the section, you can check System information, Status, 4G Network, Bluetooth,
Wifi, Position info, satellite info.
(1) System information, includes the basic information includes receiver type, serial
number, system firmware version, board firmware version, radio firmware
(radio type), front panel firmware (T300 PLUS doesn’t have front LCD panel),
Web version.
(2) Status: Show the device status and data link status, includes work mode, data
link, internal storage capacity and current free storage. The default work mode
is rover with the new device, others will be same with the Survey Master
settings. Data link status will vary from different work mode, the default is null.
(3) 4G Network, when there is SIM card inside in the receiver, it will start itself, and
read the signal intensity, APN, and show started. If there is no SIM card inside,
it will show stopped.
(4) Bluetooth information, shows Bluetooth name and Mac address, Bluetooth
name cannot be changed; WIFI information, shows WIFI name, current Wifi
password and Mac address. The Wifi password is 12345678, the client can change
the password, click Save config to save configuration.