User's Guide

SinoGNSS
○
R
T300 PLUS User Guide
11
3.3 Receiver Web GUI interface
Step 1: Connect Wi-Fi of T300 PLUS receiver
Turn on the T300 PLUS GNSS receiver and wait for the T300 PLUS serial number to
appear under the available Wi-Fi networks on your smart phone or office
computer.
For example, T300 PLUS-T31LXXXXX (where xxxxx represents the last five digits of
the receiver serial number).
Enter password: 12345678
Step 2: Login the Web
Select the receiver, open a web browser and then enter the following IP address:
http://192.168.1.8
Tip: Most web browsers for computers / laptops and smart phones / PDAs support the receiver
Web GUI
Step 3: Enter the default login settings to access the main page
• Username: admin
• Password: admin
After accessing the main page, configuration menus are listed on the left, and
receiver’s settings on the right. Each configuration menu will be demonstrated in
the following sections.