User's Guide
Table Of Contents
SinoGNSS
○
R
N5 User Guide
26
Rover station
Click Device-> Base ->Add, select External radio.
5.7 PDA CORS Mode
Without setting up your own base stations, the N5 GNSS receiver can receive
correction data transmitted from continuously operating reference station via
PDA’s GPRS or WIFI. To do RTK survey in PDA CORS mode, it requires:
○
1
A N5 receiver
○
2
A Whip antenna
○
3
A controller with software installed
○
4
A range pole with bracket
When start succeed, set up the
frequency channel, and Rover
frequency should be same.
Be sure to set the same baud
rate as your CDL5 (default value
is 38400, you also can change in
Param tab based on your CDL5).