User's Guide

SinoGNSS
○
R
N5 User Guide
22
Tip: If you are failed to connect with receiver through Survey Master, you can just follow prompt
info to go into the device Bluetooth setting interface to make sure Bluetooth paired successfully.
Sometimes you need restart the receiver or Survey Master Software.
5.5 Internal Radio Mode
N5 GNSS receiver supports transmit & receive the correction data in internal radio
mode. To conduct the RTK survey in internal radio mode, it requires:
Tip: The external power supply is recommended when N5 set as a base station.
More: Aim to improve the radius of work field, we can change the base receiver’s Whip
Antenna to External Antenna. And others no need change.
5.5.1 Start Base Station by Survey Master
Firstly, build Bluetooth connection between the N5 receiver and your controller
as shown in Chapter 5.4.
Secondly, modify parameters including correction format, antenna type and
communication protocols:
 Click Device-> Base ->Add, select Internal radio.
○
6
○
1
A controller with software
installed
○
2
An extension bar
○
3
Two units of N5 GNSS
receiver
○
4
Two whip antennas
○
5
A range pole with bracket
○
6
Tripod and tribrach
①
②
① N5 GNSS Receiver
② External Antenna