User's Guide

SinoGNSS
○
R
N5 User Guide
15
 Click to select the Antenna Type and Measurement. If you cannot find
N5 antenna, 1) input the value of R0 (horizontal offset from measurement
mark to phase center), h0 (vertical offset from measurement mark to phase
center) and h1 (vertical offset from measurement mark to receiver bottom). R0
is 0.0775m, h0 is 0.0325m and h1 is 0.038m respectively for N5 receiver; 2) or
check Enable antenna configure file to select Antennas.ini file to select
Antenna type again. You can also add, edit and delete antenna types based on
your requirement.
 Click to change Convert Settings, mainly export format and export
observation information.