Specifications

Community R-Series Installation/Operation Manual for Models R.5 and R.25 — Page 15
ribs to dampen vibrations. Perforations in the horn reduce reflections from the LF driver while still providing
optimum pattern control and acoustic loading for the high frequency driver.
Weather-Stop™ Grille
Each enclosure is fitted with Community’s proprietary Weather-Stop protective grille. The grille consists of an
external perforated stainless steel panel, followed by a layer of open cell foam, and an inner layer of 100 x 100
(per sq. in.) stainless steel wire mesh. This grille assembly prevents water intrusion, while providing a high
degree of acoustic transparency.
Stainless Steel Hardware
Exposed hardware and fasteners are made of corrosion-resistant stainless steel.
Input Cables
To help maintain its weather-resistant properties, there are no connectors on an R-Series loudspeaker. Instead,
input is via an attached cable rated for outdoor use.
Envirotech™ Technology
All internal circuitry is protected from the elements with our proprietary Envirotech coating which seals sensitive
electronic components against the effects of moisture and corrosion.
High-Performance Crossovers and Autoformers
R.25 and R.5 models feature high-power, high-performance two-way and three-way passive crossover networks
with over-current protection circuitry. 70V/100V models use a 200W, high-performance autoformer with lower
loss than a true transformer (the R.5SUB-T uses a high-performance true transformer).
Versatile Mounting Accessories
Weather-resistant stainless steel yoke-style mounting brackets are included with most models, while a variety of
optional mounting kits are available for others.
Custom Colors
For volume purchases, all R-Series and WET II products may be ordered in custom color enclosures at a
nominal fee to elegantly match their physical installation environment.
FEATURES