Owner`s manual

PAGE 31 Community Solutions™ Owner’s Manual
11.5.7 SBS25 Pole Socket
The 1-3/8 in. (35 mm) diameter pole socket on the top of the SBS25 subwoofer accepts the
Community SB5 Mounting Pole accessory. This allows an SLS915, SLS918, or SLS920 fitted with a 1-
3/8” (35 mm) stand socket, such as an Ultimate Support SM200, to be pole mounted on top of the
SBS25. The SB5 is a 5 ft. (1524 mm) long x 1-3/8 in. (35 mm) diameter steel pole finished with black
paint. When inserted the pole goes to the bottom of the enclosure. The exposed portion can be cut to
any desired length to adjust the height of the full-range loudspeaker as needed.
11.5.8 SLS920H Horizontal Mounting
The SLS920H is supplied with the HF horn rotated 90 degrees to allow horizontal mounting of the
loudspeaker. In this position the HF coverage is 65º H x 50º V. A standard SLS920 can be field
modified to make an SLS920H. This requires replacing the HF horn/driver assembly with the ‘H’
version obtainable from the factory.
FIGURE 13: SBS25 Pole Socket