Owner`s manual

PAGE 15 Community Solutions™ Owner’s Manual
5.14 Front Grille
The front grille is powder paint coated, 16 gauge perforated steel, retained by screws in each corner.
3M™ dual-lock fasteners are used elsewhere on the grille face to provide additional support and to
damp any resonances. The grille has an edge gasket that allows easy installation of a custom grille
cloth for matching the surrounding decor.
5.15 Enclosure Finish
The enclosures, except weather resistant FE models, are finished with a black or white (model number
suffix = WHT) water-based acrylic that can be field painted. Optional factory painted, custom color
finishes (model number suffix = SPL) are also available.
Weather-resistant models (model number suffix = FE) are finished with a black, hand-laminated
fiberglass coating with hardware and other features incorporated to make them resistant to the effects
of weather.
5.16 Optional Accessories
Accessories are available from Community and 3rd party sources for the Community Solutions
loudspeakers.
5.16.1 Community Accessories
EYBLTKIT – Eyebolt suspension kit with 4 load-rated, forged 3/8” eyebolts and cup lock
washers)
SB5 – Mounting Pole for pole mounting an SLS915, SLS918, or SLS920 on top of an SBS25
subwoofer.
5.16.2 3rd Party Accessories
The following are companies that make accessories that may be used with Community Products.
Mounting Brackets Stands and Stand Sockets
Omnimount™ Systems Ultimate Support™ Systems, Inc.
1501 West 17th Street 2506 Zurich Drive
Tempe, AZ 85281 Ft. Collins, CO 80524
Tel: [phone] Fax: [phone] Tel: [phone] Fax: [phone]