Specifications

Community R2-Series Installation/Operation Manual — Page 8

ENCLOSURE

The R2 enclosure is made entirely of hand-laminated fiberglass. An inner low frequency fiberglass horn is

bonded to the outer enclosure shell creating an air chamber between the two which forms the woofer enclosure.

A separate mid-high frequency fiberglass horn is bolted into the mouth of the bass horn. All bolts and screws for

mounting the enclosure and the mid/high horn assembly are stainless steel. All external mounting hardware is

stainless steel. The speaker cable gland-nut is made of polypropylene and approved for outdoor electrical

installation.

WEATHER-STOP

GRILLE

Each enclosure is fitted with Community’s proprietary Weather-Stop™ protective grille. The grille consists of a

corrosion-resistant outer layer of perforated steel with a proprietary zinc-rich epoxy dual-layer powder coat finish

in light grey, a center layer of UV-resistant reticulated foam, and an inner layer of fine-mesh screen made from a

UV-resistant synthetic material that blocks rain and fights rusting. This grille assembly prevents water intrusion,

while providing a high degree of acoustic transparency.

ACCESSORY

Each R2 loudspeaker includes a yoke mounting bracket. The R2 Mounting Yoke provides a convenient and

robust mounting system consisting of a yoke and associated hardware to securely set the aiming angle. The

yoke assembly provides a number of possible mounting scenarios as well as capability for easily orienting the

aiming of the loudspeaker.

INPUT CABLE

800W T0 1200W 4 OHM AMPLIFIER

R2 QUICK START - FEATURES

R2 Mounting Yoke (included)