Installation manual

Community WET Series II - Operation and Installation Manual - Page 9
Italiano - Gli altoparlanti descritti in questo manuale sono disegnati e sono intesi essere ‘volato' o sospeso per
la prestazione massima acustica usando una varietà di attrezzare di hardware, i mezzi, ed i metodi. È essenziale
che tutta il lavoro di installazione coinvolgendo la sospensione di questi prodotti di altoparlante è eseguita da
dalle persone competenti, addestrate che capisce le pratiche di attrezzare di cassaforte. La lesione severe e/o la
perdita di vita possono accadere se questi prodotti sono erratamente installati. Per favore di leggere la sezione
di attrezzare per le ulteriori informazioni.
Español - Los altavoces descritos en este manual se diseñan y son pensados ser ‘volado' o suspendido para el
desempeño acústico máximo que utiliza una variedad de aparejar hardware, de medios, y de los métodos. Es
esencial que todo trabajo de la instalación que implique la suspensión de estos productos del altavoz sea
realizado por personas competentes y entrenada que entienden aparejar seguro las prácticas. La herida y/o la
pérdida severas de la vida pueden ocurrir si estos productos se instalan impropiamente. Lea por favor la
sección a aparejar para la información adicional.
Introduction to Weather-Resistant Loudspeakers
Weather-resistant is a relative term that implies a loudspeaker’s ability to resist the effects of weather in
outdoor environments. Loudspeakers have been designed to be weather-resistant with varying degrees of
success. Typical weather-related damage problems encountered in such designs, in general order of
significance, concern the enclosure, drivers, hardware, and internal components such as crossovers.
WET Series II loudspeakers have been designed to be highly weather-resistant. WET II enclosures are fabricated
entirely of hand-laminated fiberglass, making it virtually impervious to weather-related effects. The drivers and
their diaphragms are made of highly weather-resistant materials, as in the case of the mid and high frequency
drivers, or are treated to repel moisture, as in the case of the low frequency drivers. All external hardware on
the loudspeaker is stainless steel. The three-layer Weather-Stop™ grille is acoustically transparent but highly
resistant to moisture intrusion. The crossover is located within a sealed chamber that forms the enclosure for
the low frequency drivers. A weather-tight gland nut provides a seal for the input cable. The input cable is a
type SJOW with neoprene insulation which is resistant to weather and UV effects.
Unpacking and Inspection
WET Series II loudspeakers are inherently rugged and are carefully packed in well designed cartons. However,
it’s wise to thoroughly inspect each unit after it has been removed from the packaging, as damage could occur
during shipping.
Please note that once the shipment has left your dealer or the Community factory, the responsibility for
damage is always borne by the freight company. If damage has occurred during shipping, you must file a claim
directly with the freight company. It’s very important to contact the freight company as soon as possible after
receiving your shipment, as most freight companies have a short time limit within which they will investigate
claims. Make sure to save the carton and the packing material, as most claims will be denied if these materials
are not retained. Your Community dealer and the factory will try to help in any way they can, but it is the
responsibility of the party receiving the shipment to file the damage claim.
It’s always a good idea to retain the carton and packing materials indefinitely, if possible, in the event that the
unit may need to be returned to your dealer or distributor for repair in the future.
Each shipping carton contains the following items:
 Loudspeaker System (Qty 1)
 Operation and Installation Manual (Qty 1)
 Warranty Card (Qty 1)
 Mounting Yoke for W2-218, W2-228 and W2-2W8 models only (Qty 1)