Installation manual

Community WET Series II - Operation and Installation Manual - Page 12

Figure 1 - Physical Features of a Typical Large WET II Enclosure

NO. FEATURE DESCRIPTION

MOUNTING/RIGGING

POINTS

½”-13 captive zinc plated inserts with ½”-13 x 2” stainless steel bolts and

lock, flat and rubber washers. Used for attaching the yoke mounting brackets

or customer-supplied mounting system.

 W2-218, W2-228 and W2-2W8 include two ½”-13 rigging points.

 W2-112 and W2-312 include four ½”-13 rigging points.

 W2-215, W2-322L, W2-315, W2-122 and W2-125 include six ½”-13 rigging

points.

GRILLE Powder-coated perforated steel backed by reticulated foam and a UV-

resistant layer of fine-mesh screen. Supplied, mounted to front of enclosure.

INPUT CABLE For signal connections to the loudspeaker. About 12 feet of 16-2 SJOW (or

18-gauge, 5-conductor, UV-resistant for 70V/100V models) retained by a

factory-sealed gland nut.

WET II LABEL Model number, coverage pattern and serial number.

MOUNTING YOKE The yoke shown is an optional mounting kit (model SSY25KIT) sold

separately for W2-312 and W2-112 that utilizes two metal plates in addition

to a yoke bracket for added safety.

NAMEPLATE Community logo.

150 lbs (68 kg) Working Load Limit / 15:1 Safety Factor