Specifications

Community R-Series Installation/Operation Manual for Models R.5 and R.25 — Page 28
MODEL R.25-94Z R.25-94TZ
Type
Two-way, horn loaded, full-range loudspeaker system, weather-resistant
Frequency Range
100 Hz - 16 kHz (160 Hz - 12.5 kHz +/- 3 dB) 100 Hz - 16 kHz (160 Hz – 12.5 kHz +/- 3 dB)
Maximum Input
200W RMS, 500W Program
40V RMS, 89V momentary peak
70V line: 200W, 100W, 50W, 25W taps
100V line: 200W, 100W, 50W taps
Recommended Amplifier
Power
420W - 600W RMS @ 8 ohms 70V/100V line (see above)
Sensitivity (1W/1m)
97 dB SPL
(160 Hz - 10 kHz 1/3 octave bands)
96 dB SPL
(160 Hz – 10 kHz 1/3 octave bands)
Maximum SPL
120 dB average, 127 dB peak 119 dB average on 200-watt tap
Nominal Dispersion
90° H x 40° V
Nominal Impedance
8 ohms (min 4.6 ohms @ 10.4 kHz) Depends on tap selected
Crossover Frequency
2 kHz
Components
LF: 1 x 8" (203mm) driver, Treated Carbon Ring Cone with Ferrofluid
HF: 1 x ¾" (20mm) exit ,non-metallic, compression driver, Ferrofluid-cooled
Driver Protection
DYNA-TECH™
Recommended
High Pass Filter
100 Hz, 24 dB/octave high-pass filter
Input Connection
Approx. 12 ft / 4m 16-2 SJOW cable (white = +, black = –)
Enclosure Material
Roto-molded HDPE, light gray color
Grille
Three-layer stainless steel WeatherStop™ grille, light grey
(Zinc-rich epoxy dual-layer powder coated perforated steel grille, foam, woven poly mesh)
Mounting
Five M8 threaded inserts
Accessories (Included)
Light grey, powder coated steel yoke bracket
Dimensions (HWD)
11.3 x 11.3 x 13.3 inches (287 x 287 x 338 mm)
Weight
20 lbs (9.1 kg) 23 lbs (10.4 kg)
R.25 SPECIFICATIONS*
* Community strives to improve its products on a continual basis. Specifications may therefore be subject to change without notice.