Owner`s manual

PAGE 21 Community R1 Series Owner’s Manual
11 TECHNICAL SPECIFICATIONS
SPECIFICATIONS
Model:
R1-66 R1-64 R1-94
Loudspeaker Type: 2-way coaxial, horn-loaded
Frequency Response: 90 Hz to 16 kHz
Power Handling (RMS / Program): 200W / 500W
(40V RMS, 89V momentary peak)
Sensitivity: (1W/1m 100-16k Hz) 105 dB 105 dB 104 dB
Nominal Impedance: 8 Ohms
(min 5.7 Ohms)
8 Ohms
(min 5.5 Ohms)
8 Ohms
(min 5.7 Ohms)
Crossover Point: 1,200 Hz
Dispersion: (Nominal H x V) 60º x 60º 50º x 35º 80º x 35º
Loudspeaker Components: LF
HF
1 x 12 in. / 305 mm)
1 x 1 in. / 25 mm titanium
Speaker Protection:
PowerSense™ DDP
1
Ferrofluid-cooled LF driver
Input Connection: 4 ft / 1.2 m x 16-2 SJOW Neoprene Cable
Enclosure Material: All fiberglass
Color: Standard
BNG models
2
50 % gray
Black
Mounting Points: 5 x 1/2 in.-13 threaded inserts
Grille: Standard
BNG models
2
3-layer WeatherStop™, light grey
(Zinc-rich epoxy dual-layer powder coated perforated steel
grille, foam, woven poly mesh)
None
Accessory Included: Light grey, powder coated steel yoke bracket
Optional Accessory: TRC400 line transformer
(200W @ 8 Ohms, 400W @ 4 Ohms)
Dimensions: Height
Width
Depth
Rear Diameter
24.75 in. / 629 mm
24.75 in. / 629 mm
29.75 in. / 756 mm
16 in. / 406 mm
Weight: Standard
BNG models
2
55.5 lb. / 25.2 kg
43.5 lb. / 19.7 kg
Note: Specifications are subject to change without notice.
1 DDP = Dynamic Driver Protection
2 See SECTION 5.1