Owner`s manual

PAGE 8 Community R1 Series Owner’s Manual
4 PHYSICAL FEATURES (See FIGURE 1)
MOUNTING / RIGGING POINTS DESCRIPTION
MOUNTING / RIGGING POINTS
Five, 4 on around the sides and 1 on rear. 1/2-13 captive zinc
plated inserts with 1/2-13 x 1-1/4 in. SS bolts, lock, flat, and
rubber washers. Used for attaching the R1YOKE mounting bracket
or customer-supplied mounting system.
OTHER MOUNTING POINTS
GRILLE RETAINERS
The grille assembly is retained by 16 #6 self-tapping SS Phillips-
head screws. Four screw from the rear of the horn mouth into a
channel in the extruded aluminum grille frame.
INPUT
INPUT CABLE
For signal connections to the loudspeaker. About 4 feet of 16-2
SJOW retained by a factory-sealed gland-nut. White = + and Black
= –.
OTHER FEATURES
R1 LABEL
Model number, coverage pattern, serial number, hook-up, and
power information. Also used to identify the top of the horn
enclosure.
1
GRILLE
Perforated steel backed by a layer of UV-resistant reticulated foam
and a fine mesh screen. (A grille is not supplied with BNG models.)
HIGH FREQUENCY HORN ASSEMBLY
Mounted inside bass horn to form a co-axial system.
8
MOUNTING YOKE
The R1 mounting yoke is included in the carton.
1 Top of enclosure is up for specified horizontal and vertical coverage.
FIGURE 1: Physical Features