Specifications
Community Distributed Design Series Installation and Operation Manual Page 5
Important Safety Instructions
Always follow these basic safety precautions
when using or installing Distributed Design
loudspeakers and accessories:
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions, particularly those
pertaining to rigging, mounting, hanging and
electrical connections.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in
accordance with the manufacturer’s instruction.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce
heat.
• Only use attachments/accessories that are
speciedandapprovedbythemanufacturer.
• Refer all servicing to qualied service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
The terms caution, warning, and danger may be
used in this manual to alert the reader to important
safety considerations. If you have any questions
or do not understand the meaning of these terms,
do not proceed with installation. Contact your local
dealer, distributor, or call Community directly for
assistance.Thesetermsaredenedasfollows:
CAUTION: describes an operating condition or
user action that may expose the equipment or
user to potential damage or danger.
WARNING: describes an operating condition
or user action that will likely cause damage to
the equipment or injury to the user or to others
in the vicinity.
DANGER: describes an operating condition or
user action that will immediately damage the
equipment and/or be extremely dangerous or
life threatening to the user or to others in the
vicinity.
WARNING:Toreducetheriskofreor
electric shock, do not expose this
apparatus to rain or moisture.
These servicing instructions are for use by
qualied service personnel only. To reduce
the risk of re or electric shock do not perform
any servicing other than that contained in the
operatinginstructionsunlessyouarequaliedto
do so.
The loudspeakers described in this manual
are designed to be ‘own’ or suspended for
maximum acoustical performance using a
variety of rigging hardware, means, and methods
in some applications. It is essential that all
installation work involving the suspension of
these loudspeaker products be performed
by competent, knowledgeable persons who
understand safe rigging practices. Severe injury
and/or loss of life may occur if these products are
improperly installed. Please read the section on
wiring and installation for additional information.