Specifications
Community Distributed Design Series Installation and Operation Manual Page 12
Specications
Model D4LP D4 D5 D6, D6-B D8 D10
D10SUB
Ceiling Loudspeaker Type Full Range Coax Full Range Coax Full Range Coax Full Range Coax Full Range Coax Full Range Coax Subwoofer
Description 4.5" Low Profile 4.5" Standard 5.0" Standard 6.5" Standard 8.0" Standard 10.0" Standard 10.0" Subwoofer
Max Input Power Rating
(8 ohms, continuous RMS)
60 Watts 60 Watts 100 Watts 100 Watts 150 Watts 200 Watts 200 Watts
Nominal Impedance 8 ohms 8 ohms 8 ohms 8 ohms 8 ohms 8 ohms 8 ohms
Maximum Voltage at Driver (RMS)
15.49 V (30 W) 21.91 V (60 W) 21.91 V (60 W) 30.98 V (100W) 30.98 V (120W) 40 V (200 W) 40 V (200 W)
Nominal -6 dB Beamwidth 140° conical 140° conical 130° conical 125° conical 120° conical 110° conical 180° conical
HF Compression driver (VC dia.) .75"/19.4 mm .75"/19.4 mm .803"/20.4 mm .803"/20.4 mm 1"/25.4 mm 1"/25.4 mm N/A
LF loudspeaker (cone dia.) 4.5"/114.3 mm 4.5"/114.3 mm 5.0"/127 mm 6.5"/165.1 mm 8"/203.2 mm 10"/254 mm 10"/254 mm
LF loudspeaker (Voice Coil dia.) 1"/ 25.4 mm 1" / 25.4 mm 1.5" / 38.1 mm 1.5" / 38.1 mm 2.0" / 50.8 mm 2.5" / 63.5 mm 2.0" / 50.8 mm
Input Connection Connector for two pair of 2-wire leads, uninterrupted whether loudspeaker is connected or not.
Internal Connection Euroblock Quick Disconnect
Available 70V Taps (watts) 30-15-7.5-3.75 30-15-7.5-3.75 60-30-15-7.5 60-30-15-7.5 120-60-30-15 200-100-50-25 200-100-50-25
Available 100V Taps (watts) NC†-30-15-7.5 NC†-30-15-7.5 NC†-60-30-15 NC†-60-30-15 NC†-120-60-30 NC†-200-100-50 NC†-200-100-50
Low Impedance 8 ohms 8 ohms 8 ohms 8 ohms 8 ohms 8 ohms 8 ohms
Enclosure Zinc Plated Steel (corrosion resistant)
Knockout Strain Relief (Qty) 1 3 3 4 4 4 4
Mounting Rigging Points (Qty) (#
of steel mounting clips)
3 3 3 4 4 4 4
Face Clips (Qty) 3 3 3 4 4 4 4
Grille Powder Coated Steel Grille with Safety Metal Clip
Included Accessories (2) C-Ring Supporting Plates, (2) Grilles, (2) paint masks, cut-out template, screwdriver
Optional Accessories Retrofit Adapter Ring (2 types), New Construction Bracket
Dimensions: Face Diameter: 9.768" (248.1 mm) 9.768" (248.1 mm) 9.768" (248.1 mm) 11.24" (285.5 mm) 13.209" (335.5 mm) 15.197" (386 mm) 15.197" (386 mm)
Depth from Baffle back:
3.599" (91.4 mm) 6.788" (172.4 mm) 6.788" (172.4 mm) 6.788" (172.4 mm) 8.166" (207.4 mm) 9.938" (252.4 mm) 9.938" (252.4 mm)
Cutout Diameter 8.75 " (222 mm) 8.75" (222 mm) 8.75" (222 mm) 10.25" (260 mm) 12.25" (311 mm) 14.125" (359 mm) 14.125" (359mm)
†The designation NC means do not use this setting when connected to a 100-volt system as it would draw too much power. NC means "No-Connect," really "do not connect."