Specifications
Community Distributed Design Series Installation and Operation Manual Page 11
diameter loudspeakers.) As suggested by its
name, the Can Adapter ring can be used as a
Trim Ring. When used as a trim ring, white rubber
holeplugs(included)llthe4countersinkindents
intended for mounting the ring to an existing larger
industry back can
A New Construction Bracket is available for
installing loudspeakers in new construction
before drywall or plaster is put in place. The
drywall typically is cut with a router-type tool or
laser guided cutter in which case the bracket hole
will serve as a cutout guide.
Optional Accessories
Community offers helpful optional accessories
that are not included with the basic packages.
Please be sure to order these parts separately if
you need them.
Retrotringsareavailableintwotypesforvarious
loudspeaker group sizes. The Face Adapter
Ring allows you to place the Distributed Design
loudspeaker alone in a non-Community made
back can. The Can Adapter/Trim Ring allows you
to mount an entire Distributed Design loudspeaker
assembly with its Community back can in a
larger non-Community back can or to mount the
loudspeaker assembly into an existing but over-
size ceiling cutout hole. If you’re performing a
retrot,youwillwanttoorderthetypeofadapter
you need in the size suitable for the loudspeaker.
(These rings are not offered for the 8 or 10 inch
Figure 4. Optional Accessories
Can Adapter/Trim Ring
(without and with screw hole plugs)
Face Adapter Ring
New Construction Bracket
Ceiling Loudspeaker Packages Adapter Rings Brackets
Size Assembled Back Can Only Face Only Face Can Adapter/Trim New Construction
4.5" Low Pro. D4LP D4LP-BC
D4-FO
D45-FAR D45-CATR D45-NCB4.5" D4
D45-BC
5" D5 D5-FO
6.5" D6, D6-B D6-BC
D6-FO
D6-FO-B
D6-FAR D6-CATR D6-NCB
8" D8 D8-BC D8-FO – – D6-NCB
10" D10
D10BC
D10-FO – –
D10-NCB
10" Subwoofer D10SUB D10SUB-FO – –
Note: All sizes are listed. Dashes indicate item not offered. Some models share a common back can or accessory
bracket/ring, as indicated in the chart.