Specifications

Chesapeake College Todd Performing Arts Center Auditorium
Audio System Upgrade
March 20
th
, 2015
Audio Systems 27 41 00-17
f. Provide manufacturer recommended rear loudspeaker enclosure
Product: Community Cloud1266, or approved equal.
13. Remote Control Touch Panel Interface (Add Alternate Only)
a. 8” Color Touch Screen Display
b. Wireless Communications
c. Provide Docking Station for use in Control Room
Product: Crestron TPMC-8X-GA, or approved equal.
14. Remote Control Processor
a. Rack Mountable, 1 RU
b. Core 3 Operating System, 32-Bit
c. Transmits Ethernet, RS-232 control signals
d. Provide programming for Xpanel integration, with iPad tablet.
Product: Crestron CP3, or approved equal.
15. Wireless Intercom Base Station
a. Frequency Range: 2400 – 2483.5 MHz
b. Frequency Response 200 Hz to 3.5 kHz
c. 600 ohm 4-wire input/output
d. External dual diversity ½-wave dipole antenna
e. Provide all required batteries and chargers for associated belt packs
f. Provide Four (4) Clear-Com BP-210 Wireless Beltpacks, with CC-400 headsets
Product: Clear-Com BS-121, or approved equal.
16. Production Intercom Master Station
a. 4-Channel Master Station
b. Provide Clear-Com CC-400 headset and faceplate microphone
c. Provide Clear-Com HB-702 wall plate station at 4-gang existing box backstage
d. Provide four (4) model RS701 wired beltpacks and associated headsets
Product: Clear-Com MS-704, or approved equal.
17. 8-Port Unmanaged PoE Network Switch
a. Eight (8) RJ45 10BASE-T / 100BASE-TX ports
b. 3.2 Gbps Switching Capacity
c. 2.4 mpps Forwarding Capacity
d. 2RU
e. PoE enabled
Product: Cisco SRW208P-K9-NA, or approved equal.
18. 16 Channel Dante Audio Interface
a. 16 balanced audio inputs on two (2) DSUB 25-pin connectors
b. 16 balanced audio outputs on two (2) DSUB 25-pin connectors
c. One (1) Ethernet output on female RJ-45 jack
d. Distributes multi-channel audio information over LAN connection to dante-enabled
devices