Specifications

Chesapeake College Todd Performing Arts Center Auditorium
Audio System Upgrade
March 20
th
, 2015
Audio Systems 27 41 00-15
3. Centralized Audio Signal Distribution Module (Add Alternate Only)
a. One (1) RJ45 A-Net signal input
b. Eight (8) RJ45 simultaneous split A-Net signal outputs
c. Rack mountable
d. Provide all required patch cabling
Product: Aviom D800, or approved equal.
4. 16-Channel Monitoring System Input Module (Add Alternate Only)
a. 16 balanced inputs – ¼” TRS connectors
b. 16 balanced thru connectors TRS
c. A-Net Out and A-Net Expansion network connections (RJ45)
d. Stereo link switches for each pair
e. Four position gain switches
f. Signal present and clip LEDs per channel
g. 1RU
Product: Aviom AN-16/I v.s, or approved equal.
5. Configurable Audio Power Amplifier
a. 20 Hz to 20 kHz Frequency Response
b. 102 dBA Signal to Noise Ratio
c. Eight (8) audio input channels
d. Two to Eight (2 – 8) audio output channels
Product: Bose PM8500.
6. Central DSP Audio Processor
a. Rack Mountable, 2 RU
b. 20 Hz – 20 kHz frequency response
c. 24-bit A/D conversion
d. Provide Bose Audio Input Cards EDR4-I
e. Provide Bose Audio Output Cards EDR4-O
Product: Bose ESP-00.
7. RoomMatch Dual 15” Subwoofer
a. Frequency Range 40 Hz – 280 kHz
b. Dual 15” drivers
c. 1000 Watt Power Handling
d. 2x 8 ohm inputs
e. Refer to the attached Bose Room Match Array Rigging Data document. Provide all
part numbers identified in this document, and comply with recommended mounting
details.
f. Reference Bose quote number US112301ChesapeakeCollege
Product: Bose RMSS215.
8. Suspended Loudspeaker Line Array
a. Frequency Response: 60 Hz – 16 kHz
b. Dispersion Pattern: 120 x 20 degrees
c. 4 ohm low frequency input