Installation guide

Meikai ENERGY
Page 11 Copyright MeiKai ENERGY 2012 REV 1.0
Here is the connection method between the branches.
A. Connect the male connecter of the first Meikai Micro-inverter in every branch to the AC
junction box.
B. Plug the AC female connector of the first micro-inverter into the male connector of the next
micro-inverter, and so forth, to form a continuous AC branch circuit.
NOTE: Check the micro-inverter rating label for the maximum number of micro-inverters
allowed on one AC branch circuit.
C. Install a protective end cap on the open AC connector of the last micro-inverter in the AC
branch circuit.