Hardware manual
31
STAC5 Hardware manual
920-0026 Rev. C
9/4/2014
Mechanical Outline
Mounting the Drive
Use #6 screws to mount your drive. If possible, the drive should be securely fastened to a smooth, at metal surface that will help conduct
heat away from the chassis. If this is not possible, then forced airow from a fan may be required to prevent the drive from overheating.
• Never use your drive in a space where there is no air flow or where other devices cause the surrounding air to be
more than 40°C.
• Never put the drive where it can get wet or where metal or other electrically conductive particles can get on the
circuitry.
• Always provide air flow around the drive. When mounting multiple STAC5 drives near each other, maintain at
least one half inch of space between drives.
4.5
1.9
4
3
2
1
0
F
E
D
C
B
A
9
8
7
6
5
5.5