User Manual

z Page 2
Setting the RF Output Power on the DAB & DAC Booster Amplifier
The RF output power is not adjustable on the DAB & DAC Booster Amplifier. The
user must adjust the RF input power to the Booster Amplifier such that the RF output
power level does not exceed the levels shown below in order for the RF output
spectral emissions to be compliant with the FCC spurious emissions limit of -13 dBm
outside of the assigned frequency block. These levels must not be exceeded.
Block Channel Center
Frequency (MHz)
Maximum RF
0utput (Watt)
A 1930.2 5
A 1930.4 - 1944.6 55
A 1944.8 5
D 1945.2 5
D 1945.4 - 1949.6 55
D 1949.8 5
B 1950.2 5
B 1950.4 - 1964.6 55
B 1964.8 5
E 1965.2 5
E 1965.4 - 1969.6 55
E 1969.8 5
F 1970.2 5
F 1970.4 - 1974.6 55
F 1974.8 5
C 1975.2 5
C 1975.4 - 1989.6 55
C 1989.8 5
This equipment complies with Part 24 of the FCC rules. Any changes or
modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment.
In order to comply with FCC rules for RF exposure, it must be observed that the
antenna connected to this equipment is fixed on an outdoor structure and that it
must have a minimum separation distance of 2 meters between it and any
person."