User's Manual

100141-INST Cell Extender Model CE-1819-10G2 Page 5 of 5
Rev. - 05/2007 User Manual and Installation Instructions
Cell Extender Electrical & Mechanical Specification
Uplink Downlink
A & D Blocks 1850-1870 MHz 1930-1950 MHz
B Block 1870-1885 MHz 1950-1965 MHz
C Block 1895-1910 MHz 1975-1990 MHz
E & F Blocks 1885-1895 MHz 1965-1975 MHz
System Gain 11dB max 10.95 dB max
20dB Nominal Bandwidth 56.65 MHz max 56.65 MHz max
System Noise Figure: 2.5 dB Max.
System Group Delay: 180 nanoseconds Max
Pass-band Ripple: 0.5 dB Max.
Output Third Order Intercept Point: +31 dBm Min. +62 dBm Min
1 dB Compression Point: +22 dBm Min. +52 dBm Min
Maximum Usable GSM/EDGE Power: N/A 20 Watts Composite
Input /Output VSWR: 1.5:1 Max. 1.5:1 Max.
Up-Link-Down-Link Isolation 80 dB
Number of Standard Inputs/Outputs: 1/1
Power Supply Voltage: 110/220 VAC
Current Consumption: 1.5/0.75 AMPS max at rated output power
Dimensions 13”L x 10 7/8”W x 7”H
Enclosure NEMA 4x Weather Proof
Connectors 7/16 DIN Type Female
Weight 20 Lbs. Max.
Mounting Pole and/or Wall Mountable