User's Manual

Page#1 of 2
PICO CELL Booster
CCI Model Number BDA-1819-10
USER’S GUIDE
Product Description:
BDA-1819-10 PICO CELL Booster:
The CCI GSM/EDGE PICO CELL Booster is Bi-directional coupler that consists of both
the uplink and downlink channel. The downlink is capable of generating a minimum
10 Watt GSM/EDGE signal. The uplink Low Noise Amplifier has the minimum of
15dBm output power with 2 dB of noise figure. It has the build in DC power supply
that will provide the whole unit. The PICO CELL Booster increases the overall
coverage area while improving performance.
Operation Description:
The BDA-1819-10 PICO CELL Booster is designed to supply nominal output power of
10 Watt GSM/EDGE. Although the gain of the PICO CELL Booster is fixed, the output
can be adjusted by the setting the input power level.
Operation and Installation Instructions:
The following instructions should be followed when installing the unit in service:
• Apply a 120VAC input voltage to the AC connector of the PICO CELL Booster
Module.
• Apply a GSM/EDGE signal of up to +15dBm to each RF input port of the PICO
CELL Booster Module.
• The PICO CELL Booster Module will provide approximately 25dB RF Gain on
the downlink and approximately 9dB RF Gain on the Uplink
• Check the RF output to insure the proper downlink output power is present.
{Approximately 10 Watts (40dBm) }.
COMMUNICATION
COMPONENTS INC
Extending Wireless Coverage
89 Leuning Street Phone: 201-34
2
-333
8
2
nd
Floor Fax: [phone]
S
outh Hackensack, NJ 07606 www.cciproducts.com