User manual

ECE 477 Final Report Spring 2004
char status,data;
#asm
push r26
push r27
push r30
push r31
in r26,sreg
push r26
#endasm
status=UCSR0A;
data=UDR0;
if ((status & (FRAMING_ERROR | PARITY_ERROR | DATA_OVERRUN))==0)
{
rx_buffer0[rx_wr_index0]=data;
if (++rx_wr_index0 == RX_BUFFER_SIZE0) rx_wr_index0=0;
if (++rx_counter0 == RX_BUFFER_SIZE0)
{
rx_counter0=0;
rx_buffer_overflow0=1;
};
};
#asm
pop r26
out sreg,r26
pop r31
pop r30
pop r27
pop r26
#endasm
}
#pragma savereg+
#ifndef _DEBUG_TERMINAL_IO_
// Get a character from the USART0 Receiver buffer
#define _ALTERNATE_GETCHAR_
#pragma used+
char getchar(void)
{
char data;
while (rx_counter0==0);
data=rx_buffer0[rx_rd_index0];
if (++rx_rd_index0 == RX_BUFFER_SIZE0) rx_rd_index0=0;
#asm("cli")
--rx_counter0;
#asm("sei")
return data;
}
#pragma used-
#endif
// USART1 Receiver buffer
#define RX_BUFFER_SIZE1 2
char rx_buffer1[RX_BUFFER_SIZE1];
unsigned char rx_wr_index1,rx_rd_index1,rx_counter1;
// This flag is set on USART1 Receiver buffer overflow
bit rx_buffer_overflow1;
F-2