Specifications

Mercury 8-Line Synthesised Manual
Page 8 © CommtechWireless
3.1.7 Turning the Pager “OFF”
1. Press the Menu Key
once. The Function Settings Menu is displayed.
2. Press either of the Arrow Keys
until the Power Off icon flashes.
3. Press the Read Key
once to confirm. The pager will then turn off.
3.1.8 Audio or Vibration Alert (Vibration mode for discreet alerts)
With the Pager ON:
1. Press the Menu Key
until the Function Settings Menu is displayed.
2. Using the Arrow Keys
select the icon.
3. Press the Read Key
once. The alert function the pager is currently set to will
flash.
4. If you wish to change, Press either of the Arrow Keys until the correct
setting is found. Choose either
for beep or for vibrate or for mute.
5. Press the Read Key once and this will change to the mode that is flashing.
3.1.9 Back-light (for viewing at Night)
The backlight is manually turned on.
On receipt of a message the backlight will not be on.
1. Press and hold the Menu Key
until the Back light comes on.
 NOTE: To extend the battery life, the Backlight will automatically turn “off” after 15 sec.
2. To turn the backlight off, you can wait for it to timeout, or hold the Menu Key
until the Backlight turns off.
3.1.10 Setting the Alarm
With the Pager ON:
1. Press the Menu Key
until the Function Settings Menu is displayed.
2. Using the Arrow Keys
select the icon. Press the Read Key once.
The Alarm Settings Menu will be displayed.
3. Use the Left Arrow Key
to decrease the value of a field and the Right Arrow Key
to increase the value of a field.
4. The Read Key
will move you along to the next character for editing.
5. Settings will be saved when you press the Read Key
to the end of the line.