User manual

Manual 7950 Pager
© CommtechWireless Page 9
2.4 Locking/Unlocking Message
Up to 16 messages can be locked to prevent them from being deleted or from being replaced when
the pagers memory is full.
When a message is locked, the  symbol is replaced by the symbol indicating the message is
locked.
2.4.1 Lock or Unlock a Message
(1) From the Message-status screen, press or to select the message you want to lock or
unlock.
(2) Press .
(3) Press to move the cursor to to lock the message, or to unlock the message.
(4) Press .
To lock or unlock a message while reading it, follow steps 2 through 4 above while the message is
displayed.
2.5 Deleting Message
This feature allows you to delete unlocked and un-alarmed messages.
2.5.1 Delete a Single Message
(1) From the Message-status screen, Press or to select the message you want to delete.
(2) Press .
(3) Press to move the cursor to .
(4) Press DELETE MESSAGE? is displayed.
(5) Press again to delete the message.
2.5.2 Delete All Unlocked, Un-alarmed and Read Messages
(1) From the Function menu, Press to move the cursor to .
(2) Press , DELETE ALL MESSAGES? is displayed.
(3) Press , all unlocked, un-alarmed and read message are deleted.
Note: Notebook messages are not deleted with this feature.
2.6 Message Alarm
This feature allows you to set a one-time or daily alarm for a selected personal message. You can set
an alarm for up to five personal messages. When a message alarm is set, replaces  in the
Message-status screen. At the time the alarm sounds,  is again displayed unless the alarm is set to
alert daily. Press to display the message for which the alarm is set. If the alarm times passes
without being acknowledged, flashes until the message is read.
2.6.1 Set a One-time Message Alarm
(1) From the Message-status screen, press or to select the message you want to alarm.
(2) Press .
(3) Press to move the cursor to .
(4) Press . The Set-message-alarm screen is displayed.