User manual

7950 Pager Manual
Page 12 © CommtechWireless
2.12 Pager Alarm
Your pager has an alarm that can be set for a specific time and date, or a specific time on a daily
basis.
At the selected alarm time, your pager alerts. If the alarm passes without being acknowledged
flashes until any button is pressed.
2.12.1 Set a One-Time Alarm
(1) From the Function menu, press to move the cursor to .
(2) Press . The Set-time-alarm screen is displayed.
(3) Press . The Set-alarm screen is displayed.
Example of Set-Alarm screen for a Specific Time and Date
The alarm symbol shows the current alarm status. is displayed if the alarm is enabled, is
displayed if the alarm is disabled.
(4) Press to move the cursor to the alarm symbol.
(5) Press until is displayed.
(6) Press to move the cursor to the hour digits.
(7) Press adjust the hour digits.
(8) Repeat steps 6 and 7 to adjust the minutes, AM/PM/24 hr, and date.
(9) Press to activate the alarm. The symbol is displayed on the Standby screen.
2.12.2 Set the Alarm to Alert Daily
(1) Follow steps 1 through 8 in “To Set a One-Time Alarm” to set the alarm time.
(2) When setting the date in step 8, press until you see double dashes for the month, day, and
year (--/--/--).
Example of Set-Alarm Screen for a Daily Alert
(3) Press to activate the alarm. The alarm is now set to alarm every day at the specified time. is
displayed on the Standby screen.