User manual

Manual 7950 Pager
© CommtechWireless Page 11
2.10 Setting the Time and Date
(4) From the Function menu, press to move the cursor to .
(5) Press to display the Set-time-and-alarm screen.
(6) Press to move the cursor to the hour digit.
(7) Press adjust the hour.
(8) Repeat steps 3 and 4 to adjust the minutes, AM/PM/24 Hr., month, day and year.
(9) Press to activate the time and date setting.
Example of Set-Time Screen
If you move the cursor past the last symbol in the row (far right), it automatically wraps around to
the first symbol in the beginning of the same row (far left).
2.11 Setting Message Alert
2.11.1 Setting the Audible Alert
(1) From the Function menu, press to move the cursor to
(2) Press .
(3) Press or to move the cursor to and press .
When is displayed on the Standby screen, your pager is in the audible alert mode.
2.11.2 Setting the Alert Pattern
You can set your pager to alert audible with a standard alert (1), one of seven pleasing alerts (2-8), a
chirp alert ( ), or a chirp and vibrate alert ( ).
Your pager must be in the audible alert mode ( displayed in the Standby screen) to select an alert
pattern.
(1) From the Function menu, press to move the cursor to .
(2) Press to display the choose alert menu.
(3) Press or to move the cursor to the desired alert. The pager gives a sample of each alert as
you move through the selections.
(4) Press to activate your selection. The pager gives a sample of the alert to confirm your
selection.
2.11.3 Setting a Silent (Vibrate) Alert
Note: If is displayed in the Standby screen, your pager is already in the vibrate alert mode.
(1) From the Function menu, press to move the cursor to and then press .
(2) Press or to move the cursor to then press to confirm.