7950 Pager User Manual (Manual Revision 1.
7950 Pager Manual NOTICE This manual, software and electronic circuitry are copyrighted. All rights reserved. Under the copyright laws, this manual, software and electronic circuitry may not be copied, in whole or in part without written prior consent of Commtech Wireless. All information provided in this document is carefully prepared and offered in good faith as a guide in the installation, use and servicing of our products.
Manual 7950 Pager Table of Contents 1.1 About This Handbook ............................................................................................................... 4 2. THE 7950 PAGER ..................................................................................................................................5 2.1 Getting Started ......................................................................................................................... 5 2.1.1 Case Layout .....................
7950 Pager 1.1 Manual About This Handbook This handbook is designed to assist you use the 7950 pager. Following the steps and checklists correctly will ensure that there will be no problems when using the 7950 pager. Conventions NOTE: A note preceded with this symbol indicates secondary information pertaining to the topic under discussion. IMPORTANT: A Right-pointing arrow followed by text in this manner presents important information.
Manual 7950 Pager 2. THE 7950 PAGER 2.1 Getting Started 2.1.1 Case Layout The Commtech 7950 pager has four buttons on its case.
7950 Pager 2.1.
Manual 7950 Pager 2.1.3 Turning Your Pager On Press for 3 seconds. A start-up screen is momentarily displayed and your pager activates the currently selected alert. Note: Press any button to stop the alert. When the pager is on but no activity is taking place, the screen will turn off. 2.1.4 Turning Your Pager Off (1) Press to display the Function menu. (2) Press to move the cursor to ( ). (3) Press and TURN PAGER OFF? is displayed. (4) Press again to turn the pager off.
7950 Pager Manual 2.3.2 Reading an Incoming Message (1) The message will be displayed on the screen. Press any button to stop the alert. Note: A flashing in the right corner of the screen indicates the message is continued on an additional screen (s). Press to display the rest of the message. (2) Press to exit. 2.3.3 Reading a Stored Message (1) From the Message-status screen press read. (2) Press to read the message. or to move the cursor to the message you want to 2.3.
Manual 2.4 7950 Pager Locking/Unlocking Message Up to 16 messages can be locked to prevent them from being deleted or from being replaced when the pagers memory is full. When a message is locked, the symbol is replaced by the locked. 2.4.1 Lock or Unlock a Message (1) From the Message-status screen, press unlock. (2) Press . or symbol indicating the message is to select the message you want to lock or (3) Press to move the cursor to to lock the message, or to unlock the message. (4) Press .
7950 Pager Manual Example of Set-Message-Alarm Screen The alarm symbol shows the current alarm status. is displayed if the message alarm is enabled, is displayed if the message alarm is disabled. (5) Press until is displayed. (6) Press to move the cursor to the hour digits. (1) Press to adjust the hour digits. (2) Repeat steps 6 and 7 to adjust the minutes, AM/PM/24 hr, and date. (3) Press to activate your selection.
Manual 2.10 (4) (5) (6) (7) (8) (9) 7950 Pager Setting the Time and Date From the Function menu, press to move the cursor to . Press to display the Set-time-and-alarm screen. Press to move the cursor to the hour digit. Press adjust the hour. Repeat steps 3 and 4 to adjust the minutes, AM/PM/24 Hr., month, day and year. Press to activate the time and date setting.
7950 Pager 2.12 Manual Pager Alarm Your pager has an alarm that can be set for a specific time and date, or a specific time on a daily basis. At the selected alarm time, your pager alerts. If the alarm passes without being acknowledged flashes until any button is pressed. 2.12.1 Set a One-Time Alarm (1) From the Function menu, press to move the cursor to (2) Press . The Set-time-alarm screen is displayed. (3) Press . The Set-alarm screen is displayed. .
Manual 2.13 7950 Pager Private Time You can select a time period during which your pager is completely silent. Your pager still receives messages but is does not alert. The pager alerts only if an alarm expires or a priority message is received. 2.13.1 Set Private Time (1) From the Function menu, press (2) Press . to move the cursor to .
7950 Pager (4) Press Manual . The message is now in the notebook. 2.14.2 Deleting Messages from Your Notebooks (1) From the Message-status screen, press or to move the cursor to the notebook from where you want to delete a message. (2) Press to display a list of the notebook messages. (3) Press or to scroll through the list until message you want to delete. is displayed at the beginning of the notebook Example of Notebook Screen in Delete Mode (4) Press to display the Function menu.
Manual 7950 Pager 3. APPENDIX 3.1 Further Help and Support Contact your Place of Purchase A CommtechWireless Authorized Distributor or Dealer sets up most systems. Contact your place of purchase with inquiries beyond the scope of this manual. This Product is Not Field Serviceable Should a fault develop with the hardware or software, contact your place of purchase for the most appropriate form of action. Do not attempt to open or repair any of the products as this may void any warranty. 3.
7950 Pager 3.3 Manual Specifications * Note: Specifications subject to change without any notice Equipment type ........................................................................ Alphanumeric POCSAG Pager Rx frequency (MHz) .......................................................138-174, 278-284, 448-472, 989-932 Baud rate ................................................................................ 512, 1200, 2400 bps selectable Power supply ......................................................
