User's Manual

Page 6 of 34
3 Accessing the Operating System
The following chapters contain information about accessing the operating system.
3.1 Log in using the GUI
This chapters details the necessary steps required to log in to the Graphical User Interface of the
operating system on the device.
Before you begin
Before connecting, make sure that the device is connected to the network, all antennas are attached and
powered up. The device must also have a previously configured IP address. For more information about
configuring an IP address for the device, see Configuring an IP address for the device using the console.
Procedure
1. Open a web browser and enter the IP address previously configured for the device.
2. When prompted with the login screen, enter the password for root access. The default root password
is shared separately and it can later be changed in the System > Administartion menu or with the
passwd command in the console.
Figure 1: The GUI login screen
3. After successfully logging in, you will be prompted with the GUI overview page.
Figure 2: The GUI overview page after successfully logging in
Results
You are now successfully connected to the device, using the GUI.
What to do next
You can use this interface to configure settings and gather information from the device.
CONFIDENTIAL - BACL Corp. - 04/28/2018