User's Manual

Page 22 of 34
6.2 Cellular network configuration
This chapters details the necessary steps required to configure a wireless network connection for the
device using the GUI.
Before you begin
Make sure the device is connected to the network, all antennas are attached and powered up. The
device must also have a previously configured IP address. For a cellular configuration, the device must
have an installed LTE module. For more information about configuring an IP address for the device, see
Configuring an IP address for the device using the console.
Procedure
1. Open a web browser and enter the IP address previously configured for the device.
2. When prompted with the login screen, enter the password for root access. The default root password
is shared separately and it can later be changed in the System > Administration menu or with the
passwd command in the console.
Figure 38: The login screen
CONFIDENTIAL - BACL Corp. - 04/28/2018