User's Manual

Page 21 of 34
Figure 22: The Physical Settings tab
You can select the Ethernet Adapter for the interface or you can create a bridge over the specified
interfaces.
7. Select the Firewall Settings tab
Figure 23: The Firewall Settings tab
You can create or assign a firewall zone for the interface on this page.
8. Click the Save and Apply button. The changes will be saved and will take immediate effect. No restart is
necessary. You can reconnect to the interface with the newly specified IP address if you want to
make further changes.
Results
An Ethernet network connection is configured for the device with DHCP. For troubleshooting purposes
you can configure the network also using the console. For more information, see the Configuring a DHCP
network connection for the device using the console chapter.
CONFIDENTIAL - BACL Corp. - 04/28/2018