User's Manual

Page 16 of 34
Figure 12: The general configuration page for the selected interface
The general setup page will let you configure the basic settings for the connection. Select Static
address as the protocol and provide the IPv4 address, netmask, and gateway that you want to use for
the device.
You can also select, the Add new interface... button if you want to create a new interface for the
device.
Figure 13: The Create Interface page
This option will let you create a new interface with a static address and the name of your choice.
After providing all details, click the Submit button. This will take you to the general configuration page
mentioned above, where you can provide the same basic IP settings for your newly created interface.
5. Select the Advanced Settings tab
CONFIDENTIAL - BACL Corp. - 04/28/2018