User's Manual

Page 15 of 34
6 Network configurations
The following chapters provide details about the various available network configurations for the device.
6.1 Wired network configuration
6.1.1 Configuring a static wired network
This chapters details the necessary steps required to configure a wired network connection with a static IP
address for the device using the GUI.
Before you begin
Make sure the device is connected to the network, all antennas are attached and powered up. The device
must also have a previously configured IP address. For more information about configuring an IP address
for the device, see Configuring an IP address for the device using the console.
Procedure
1. Open a web browser and enter the IP address previously configured for the device.
2. When prompted with the login screen, enter the password for root access. The default root
password is shared separately and it can later be changed in the System > Administartion menu or
with the passwd command in the console.
Figure 10: The login screen
3. Select the Network Interfaces menu option from the menu bar on the top of the page. On this
page you can see a list of the already configured interfaces with their status and basic configurations.
You can also Connect, Stop, Edit, or Delete each individual interface.
Figure 11: The Interfaces page
4. Select the Edit button of an already existing interface that you would like to configure.
CONFIDENTIAL - BACL Corp. - 04/28/2018