User's Manual

Page 13 of 34
Administration This menu lets you change the password and the
SSH connection settings.
Software This menu lists the installed packages and their
versions. The default values are included in the
basic software configuration, and changes are not
recommended.
Startup This is a list of scripts that start automatically after
the device is powered on.
Scheduled tasks You can schedule the execution of user defined
scripts in this menu.
Mount points This menu shows a default list of mounted devices
and file systems. In case you want to attach a
USB drive or another external peripheral (that is
supported by the system) you can do that here.
LED configuration It is recommended to keep the default settings.
This is where you can change the LED lights
configuration in special cases.
Backup / Flash firmware This menu is used for backing up and updating the
firmware. For more information, see the Updating
the Operating System chapter.
Custom commands You can define custom shell commands in this
menu, that can be executed from the GUI.
Reboot Reboots the device. All connections will be
terminated by this process and you must log in
again after the reboot is completed.
Services
OpenVPN By default, there is no VPN connection used by the
system.
Network
Interfaces This menu lists the available interfaces. By default a
wired connection is configured for the device with a
static IP address.
DHCP and DNS You can change the DHCP and DNS handling
settings for the system. It is recommended to use
the default values.
Host names This is where you can configure the host names.
It is recommended to use the default values.
Static routes You can specify static routes per network
configuration in this menu. It is recommended to
keep default settings.
Diagnostics You can find the basic diagnostic tools supported
by the OS in this menu: ping, traceroute, and
nslookup.
CONFIDENTIAL - BACL Corp. - 04/28/2018