User's Guide

Configuring the S1000R Router 18
Beacon Interval
Specifies the time in which a beacon packet must be
broadcast.
By default, all the SSIDs will be beaconing at an interval of
100msec. (Range: 50 msec to 3500 msec)
Transmit Power
This defines the strength of the signal being transmitted
from a radio.
By default, both the radios will be transmitting at the highest
Transmit Power.
Block Dynamic Frequency Selection (DFS)
Channels
This option allows the Auto Channel Selection (ACS)
mechanism to either select/unselect DFS channels.
The following channels are classified as DFS channels:
52,56,60,64,100,104,108,112,116,120,124,128,132,136,140
By default, the 5GHz radio will block all the DFS channels.
One can enable the use of these channels by unchecking
the checkbox and applying the settings.
NOTE: It is NOT recommended to use these channels.
MAC Address Filtering
This feature is used to ALLOW or BLOCK MAC addresses from associating with a Private SSID.
By default, this feature is DISABLED on every Private SSID.