User Guide
Table Of Contents
- Contents
- List of figures
- List of tables
- New in this release
- About this document
- Introduction
- Getting Started
- Configuring the S1000C Router
- Using the S1000C
- Troubleshooting
- Troubleshooting installation problems
- Resetting the S1000C
- LED quick reference
- Router connection problems
- Using LEDs
- FAQs
- Why does the S1000C need a GPS antenna?
- Why does the S1000C need an external GPS antenna?
- What should I do if the GPS fails to acquire a lock?
- What happens to the S1000C if there is a power outage or if you lose Internet access?
- Can you move the S1000C to another location?
- I have a DSL modem and cannot connect to the Internet
- My calls work fine outside but drop indoors
- My Internet connection is slow when my laptop is connected to the S1000C
- Getting help
- Safety information
Table 3-4. Edit SSID Details parameters
Parameter Description
SSID Setup
SSID The name of the network to which a device can associate. SSID must
be in the range of 1 to 32 characters, and must be unique.
Note: If you want to change the name of the SSID, change the
text of the SSID text box, then click Save Changes. All SSID
values will remain the same; only the name will change.
Wireless Security
Security Mode The security mode in which the SSID is currently operating.
Valid values
• open
• WPA-Personal
• WPA-Enterprise
•WPA2-Personal
•WPA2-Enterprise
• WPA/WPA2-Personal
• WPA/WPA2-Enterprise
Note: For Enterprise versions, a RADIUS server based
security check is performed: You will enter values for Radius
Server:
– Server IP Address (A.B.C.D)
– Server Port (Range: 1 to 65535, Default: 1812)
– Server Shared Secret (WA
P to Radius Server)
– Server re-keying interval; this is the time after which the
key
must be re-generated. (Range: 600 to 7200 seconds,
0 - disable, Default: 600 seconds)
Cipher Type This field can be set to one of the following options:
• TKIP – Temporal Key Integrity Protocol
• CCMP – Counter Mode CBC MAC Protocol
• TKIP & CCMP
<Security Mode> - Personal
Passphrase Password required to associate with AP. This can be 8-63 ASCII
characters.
Group Re-keying interval The period of time between automatic
changes of the group-key with
the devices on the network.
Chapter 3 Configuring the S1000C Router
S1000C User Guide, Release 1.5 3-9
DR
AFT