User Guide

Table Of Contents
S1000C User Guide, Release 1.5 1-1
D
R
A
F
T
Chapter 1
Introduction
The S1000C 3G+4G Small Cell Device is an indoor small cell intended for use by
small to medium size businesses. The device contains an S1000 coupled with the
CDMA FAP in a single enclosure. The combination of the S1000 and cFAP allows
both data and voice capability in a single offering.
The S1000C offers any-to-any mobility through LTE technology, offering users
seamless mobility between indoor and outdoor coverage. It also offers dual-
concurrent 2.4/5 GHz 802.11ac WiFi to deliver high data rates and performance.
The WiFi capabilities include automatic channel selection and Interference avoidance,
and Band steering to 5GHz for supporting devices. Up to 12 SSIDs are supported with
transparent authentication of public SSIDs using the 802.1x protocol.
Circuit Switched Fallback (CSFB) enables circuit switched voice and SMS services to
be delivered to dual radio Long Term Evolution (LTE) component of the S1000C, then
switched to the 3G network running on the internal cFAP. In this release, the cFAP
used is the C4500 (CDMA).
Using this guide
This user guide introduces you to the services and features of the CommScope
S1000C. The guide is divided into the following chapters:
Getting Started on page 2-1
Configuring the S1000C Router on page 3-1
Using the S1000C on page 4-1
Troubleshooting on page 5-1
Safety information on page 6-1
It is important that you read each section and note any special requirements before you
use the device.