Specifications

Appendix D Field Replaceable Units

ONECELL

Hardware Installation, Release 4.5 D-3

Off-site activities

Before replacing the BC module, import a new EDF file to the DMS. This file

contains the BC MAC address and HeMs password specific to the new BC.

1 Access the FTP location on DMS using ftp protocol, port 2100.

2 Upload the EDF file to /appdata/dms/import/factory.

3 Access the DMS Network console from a supported Web Browser.

NOTE: The DMS GUI supports Microsoft Edge 81 and later, Google Chrome 81

and later, and Mozilla Firefox Quantum 68 and later.

4 Enter the IP address for the Network Management portal.

http://<IP Address DMS server>/networkconsole

The Sign In dialog box displays.

5 Enter Username and Password. The Search Device screen displays.

7 Configuration details for WebGUI commissioning

Note: These parameters are derived from the failed

unit being replaced.

8 Ethernet cable

Note: Required for connecting the laptop to the

ONECELL Baseband Controller Management port

9 DMS FTP IP address

Step Prerequisite Completed